top of page

Creating spaces where people feel at ease — since 1971

Plan de travail 1 copie_2x.png
Plan de travail 1 copie_2x.png

Brisa Distressed

Ultra-cuir

Supplier : 

Bugatti Design

  • Content: 100% polycarbonate polyurethane surface; backing: 65% recycled polyester, 35% rayon
  • Reduced environmental impact: Backing contains 65% recycled polyester
  • Pattern repeat: 8 in vertical, 10.5 in horizontal
  • Railroaded: Not specified
  • Backing: 65% recycled polyester, 35% rayon
  • Finish: 100% polycarbonate polyurethane
  • Abrasion resistance: 300,000 double rubs (Wyzenbeek – ASTM D4157); 160,000 rubs (Martindale – BS EN ISO 12947-2)
  • Flame resistance: ASTM E84 Class A, CA TB 117-2013, FMVSS 302, NFPA 260 Class 1, UFAC Class 1; also compliant, depending on configuration, with unadhered ASTM E84, BS 5852 Sources 0, 1 and 5, IMO FTPC Part 8, and BS EN 1021 Parts 1 and 2
  • Width: 54 in / 137 cm
  • Full roll size: Not specified
  • Colorfastness: AATCC 16.3 – Grade 4 after 200 hours; ISO 105 B02 – Grade 6; AATCC 8 – Grade 4-5 for wet and dry crocking
  • Weight: 8.9 oz/yd² / 300 g/m²
  • Thickness: Approximately 0.95 mm
  • Hydrolysis: 16 weeks – ASTM D3690, Section 6.11; ISO 1419, Method C
  • Maintenance: Clean with soap and water and wipe spills promptly. May be disinfected with a 1:5 diluted bleach solution. For stubborn stains, promptly use isopropyl alcohol. Rinse thoroughly with clean water to remove any residue, then allow to air dry.
bottom of page